機型適用 Application

本機適用于產品在實施滾涂、噴涂、淋涂后表面涂料中稀釋劑、氣泡的揮發流平，然后干燥。

This machine is suitable for volatilizing and leveling of diluents and bubbles in the surface coating after roll coating, spray coating and shower coating, and then drying.

工作原理 Working principle

產品在實施滾涂、噴涂、淋涂后，流經可調節溫度的恒溫隧道，產品進入前段時表面涂料中稀釋劑、氣泡就會揮發流平，進入后端在較高溫度下（或UV固化機），產品就進行了干燥。

After the product is applied by roller coating, spray coating and shower coating, it flows through a constant temperature tunnel with adjustable temperature. When the product enters the front stage, the diluent and bubbles in the surface coating will volatilize and level, and enter the rear end at a higher temperature (or UV curing). Machine), the product is dried.

機型特性 Characteristics

隧道溫度可根據產品需要設定、調節，適應各種涂料的溫度工藝條件。

輸送速度可變頻調節，適應各種涂料的流平時間工藝條件。

The temperature of the tunnel can be set and adjusted according to the product requirements to adapt to the temperature conditions of various coatings.

The conveying speed can be adjusted by frequency to adapt to the leveling time process conditions of various coatings.